Manjši bratec popularnega EvicaVT z zamenljivo baterijo in v glavnem vsemi (in še nekaterimi dodatnimi)bonbončki večjega bratca
Size: 22.20*38.20*82.00mm
Output Mode: VT-Ti/VT-Ni/VW/Bypass Mode
Output Wattage: 1-60W
Resistance Range: 0.05-1.0ohm for VT mode
Resistance Range: 0.1-3.5ohm for VW/ Bypass mode
Temperature Range: 100-315℃/ 200-600?F
Colors: Black, White, Cyan
Features
1. 3 Modes:VT-Ni, VT-Ti, Traditional VW;
2. Support with Pure Nickel(Ni200, made in USA) and Pure Titanium wire, and 100% organic cotton;
3. Changeable Battery and Magnetic Cover
4. Save huge of battery and liquid consumption without a dry hit
5. Enhance flavor experience with the change of temperature settings by displaying in the big OLED screen;
6. 3 Attractive colors available;Black, White and Cyan
Power on/off:
Press the fire button 5 times in quick succession to turn the device on/off.
Vaping: Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
Stealth function: While the device is on, simultaneously hold the fire button and turn the control knob to the left. This will switch between Stealth on and Stealth off function.In Stealth on Mode, you can vape with the OLED screen off.
Adjustment Lock function: While the device is on, simultaneously press the fire button and turn the control knob to the right. This will switch between Adjustment Lock and Adjustment Unlock function. Shift Between VT-Ni/VT-Ti/VW Mode: Press the fire button 3 times to enter the menu. You can select mode and adjust settings by turning control knob to left or right.
VT mode:
1). Lock/unlock the atomizer resistance in VT mode: press the fire button for three times to enter into menu and urn the control knob to the left side 2 times. The third row will blink. Turn the control knob to the right to lock or unlock the resistance of the atomizer;
2). New atomizer coil installation: when replacing a new atomizer, it may require resetting of the atomizer ?base resistance?;
3). Wattage Adjustment in VT Mode: wattage can be adjusted in VT mode. Press the fire button 3 times to enter the menu. Turn the control knob to the left, and the second row will blink. Then turn the control knob to the right to adjust the wattage, and press fire button to confirm.
Dirk Oberhaus - idealen chart
Dirk Oberhaus Review
https://www.youtube.com/watch?v=OkvFT7x5NQw
Rip "Stoned Eyes" Trippers review
https://www.youtube.com/watch?v=suWa6I07N8k#t=23
VapingWithTwisted420 ga v bypass modu natera preko 100W (93 z dropom)
https://www.youtube.com/watch?v=IjhI_QEC6GQ
Težka naloga za vse klonerje iz Čajne da za 38$ naredijo boljšo ali vsaj enako napravo
Step-down dela za razliko od IPV mini D2...